Graduated bob square for medium hair. Photo with and without bangs, haircut scheme

Bob-bob is a combination of 2 haircut options (bob and bob). The combination allows you to achieve pomp and uniqueness in the classic version of the square, which is the basis of the haircut.

Additional graduation of the strands makes it easier to style the hairstyle and adds even more volume to the hair (confirmed by the photo before and after), this haircut also allows you to hide the imperfections of the face oval and visually reduce age. The most common version is a bob-square for medium hair.

Characteristic features of a graduated bob-bob haircut

The square (translated as a square) in the classical version is distinguished by a clearly delineated line of hair length, just above the shoulders. When cutting a bob, a high neckline is created and a slight lengthening of the strands near the face is created. Graduation is created by shortening the hair at different angles of strands or setting scissors, as a result, the curls lie in the form of a "ladder" with smooth transitions.

As a result of the combination of the listed haircuts, the hairstyle has an increased volume at the back of the head, and the trim curls frame the face. Thanks to graduation (it can be framed only at the ends, up to the middle of the length of the strands or for the entire length of the hair), you can change the appearance of the hairstyle, styling is easier, and the hair looks lighter and more manageable.

It is important to know that the hairstyle is complex in execution, therefore, only a qualified master is required to entrust its implementation.

Advantages and disadvantages of haircuts for medium length hair

A graduated bob square for medium hair (photos of haircuts in different variations allow you to emphasize both its advantages and disadvantages) has the following pros and cons:

If the haircut has not created the desired volume, then it can be increased by painting with a curl using highlighting, ombre or balayage.

Who is the haircut suitable for?

A bob based on a square with graduation elements is recommended for women in the following cases:

• after 40 years, a haircut allows you to visually reduce age;
• lovers of non-standard hairstyles allows you to make a variety of styling by changing the image (without visits to the hairdresser);
• the haircut is suitable for both business women and athletes, and young mothers, as it does not require a long and complex styling;
• women who follow fashion and want to look modern, but individual (thanks to the change in the angle of graduation when cutting and styling, you can create a unique hairstyle).

A haircut allows you to perform various types of coloring, which can only emphasize the layering of the haircut and its volume, therefore it is suitable for women who like to experiment with hair color.

Graduated bob-caret options

Graduated bob-caret for medium hair (photos allow you to evaluate the diversity of this haircut) can be performed in the following options:

• classic haircut. It is characterized by the volume on the back of the head, which is made by graduation, and elongated strands at the face not below the shoulders;
• extended version. It is highlighted by long, straight strands below the shoulders (the length is determined by the client). If desired, curls near the face can be highlighted using staining;
• oblique nape. When styling a haircut on the back of the head, the hair length is kept less short than with the classic version. And the transition to the strands near the face is carried out under an oblique cut;
• on the leg. It is characterized by short hair on the lower part of the back of the head (up to 3 mm) and shorter strands on the upper part of the back of the head. Facial strands are elongated;
• asymmetrical. It is distinguished by the difference in the length of the hair of the front curls and an oblique cut in the back;
• on short hair. The haircut is very short. There remains only the volume on the back of the head and elongated facial curls (it resembles the classic version of the men's haircut);
• for long or medium hair. When cutting, shortening of the strands in the occipital region and lengthening at the face are also observed;
• with a shaved temple. It is performed mainly with an asymmetric haircut. Shaving with drawing is possible;
• with shaving of the lower occipital region. Suitable for all types of haircuts (except asymmetric) and for any length.

You can choose the uniqueness of a haircut by varying the graduation (only at the ends, from the middle or along the entire length of the hair), changing the smoothness of the transitions (increasing or decreasing the angle of the brace or cut of the strands) and various execution of the bangs (asymmetric, torn, voluminous).

How to choose the type of haircut for your face shape?

Before choosing the type of haircut, it is important to determine in advance whether this hairstyle will be combined with the oval of the client's face. Recommended design options for bob-caret with graduation for different face types in the Table.

When choosing the length of the main strands, it is important to consider the length and wrinkles of the neck.

A long graduated bob-square allows you to hide imperfections, and in a short version it reveals a graceful neck.

How to choose a haircut for the hair structure?

A bob square with graduation allows you to visually increase the volume of hair, therefore, when choosing a haircut for an average length, it is recommended to first determine the structure of the hair. And also see the results of this haircut in the photo.

Features of performing haircuts from hair type:

• straight lines. Any haircut options with or without bangs are suitable;
• curly. It is recommended to cut hair of medium length or long. With a short length, styling will look sloppy. The options for choosing bangs depend on the oval of the face;
• elastic curls. To maintain the desired shape of the haircut, it is advisable to produce it on long strands without bangs. Otherwise, the "poodle" effect is possible;
• liquid hair. A haircut for short and medium hair with torn bangs will add the missing volume. Smooth graduation is recommended;
• Thick hair. Suitable for hair of medium length and long, as well as asymmetrical performance. And the graduation will add lightness to the hairstyle.

The master will additionally recommend suitable styling, which will allow - to hide facial imperfections and give the desired shape to the haircut.

Haircut tools

Before starting a haircut (especially when doing it at home), it is important to purchase or prepare the necessary tools in advance:

• straight scissors. The length of the working blade is not more than 10 cm. It is important that the scissors are sharply sharpened, and also close easily and smoothly;
• thinning scissors. Better with teeth on one working blade;
• barber straight razor. May be required when performing torn bangs or to give a haircut a more pronounced graduation;
• hair clipper. It may be required if desired, shaving the back of the head or temples;
• a combined comb with a slight taper in the area of ​​frequent teeth;
• hairbrush with a ponytail. Allows you to more accurately divide the hair into zones;
• spray. Fill it with water in advance;
• hair clips at least 6 pcs. middle length;
• brush for shaking off cut hair from the face and neck;
• mirror. It will allow the master to check the uniformity of the length of the strands on the face;
• peignoir or oilcloth cape. It will protect your clothes from short hairs that stick out;
• apron for the master. It will also protect clothing from clipped hair;
• medium and small diameter brushing and hairdryer. You will need it to create a hairstyle.

A haircut is difficult to perform, therefore, it is almost impossible to produce it yourself (to yourself).

Scheme and technique for performing a graduated bob bob haircut on medium hair

Graduated bob-caret for medium hair (photos of the execution techniques presented later in the article facilitate the process of creating a haircut) is carried out in stages.

Classic version without bangs

Its implementation involves the following steps:

1. It is required to wash your hair (or moisten well with clean hair) to remove hair kinks from a hairstyle or headdress.
2. Dry the strands until wet.
3. Comb well to the ends to completely eliminate tangled hair.
4. Using clips (7 to 9 pieces required) and a ponytail comb, divide the hair into zones:

• • parietal (hair gathers at the crown);
  • temporal (can be immediately divided into upper and lower parts, if there are enough clamps);
  • the occipital is divided into 4 parts (2 lateral zones and a central one, which additionally needs to be divided into upper and lower parts).

5. Hair cutting starts from the central occipital zone, its lower part. It is required to select the control strand so that it is convenient to hold the hair between the index and middle fingers.
6. Carefully comb the selected section with a combination comb so that the hair is parallel to each other without kinks. Cut to the desired length.
7. Further, focusing on the trimmed strand, the hair is cut in the central lower occipital zone.Hair needs to be divided into strands with horizontal parting and placed at an angle of 90 degrees to the neck.
8. After completing the haircut of the central part of the lower occipital zone, it is required to check for compliance with the length.
9. Release one of the lateral zones of the back of the head from the clamp and select from it a small strand near the neck and next to the central occipital zone (fasten the rest of the hair back with a clamp). Focusing on the length of the hair of the already trimmed zone, by highlighting horizontal strands, position it perpendicular to the neck, cut both lateral zones of the back of the head.
10. Comb the occipital area and check for compliance with the length of the strands. If necessary, trim the long ends that have fallen out.
11. Next, the temporal zones are trimmed. Comb the lower part of the temporal zone and highlight the control strand near the neck, near the lateral occipital zone. With a reference to the length of the already trimmed strand, make a cut. This strand will be the control for the temporal zone.
12. The subsequent haircut of the entire temporal part is carried out by the strand-by-strand method, the hair is located perpendicular to the floor, and each subsequent strand is cut 1 mm longer than the previous one.
13. Cutting the parietal zone is similar to cutting hair on the back of the head. The control strand stands out from the upper part of the occipital zone. By changing the angle of the strands, you can increase or decrease the volume of the hair at the crown.
14. Using thinning scissors, make the required edging of the strands.

Make suitable styling.

With oblique bangs

When choosing a haircut with a side bang, the cutting technique is the same.

The bangs are trimmed at the end:

1. It is determined from which side the lengthening will be performed and to what length (it may coincide with the length of the temporal strands).
2. With the help of straight scissors, cut the strands for lengthening (that is, on the short side).
3. Check the smoothness of the cuts and the transition of the bangs to the main haircut.

In conclusion, the bangs are thinned and the hairstyle is styled.

With straight bangs

Straight bangs are performed after the completion of the main haircut:

1. It is required to select the control strand in the center of the bangs at eye level. Carry out a cut.
2. Next, focusing on the length of the trimmed strand, trim the entire bangs.
3. With the help of thinning scissors, smooth the transition from the main haircut to the bangs.

At the end, filing and styling is done.

Long bangs

When choosing long bangs, you can select part of the hair from the parietal zone and combine it with bangs. This will give a smooth transition and uniqueness of the hairstyle. The haircut is carried out in the same way as a straight bang. In the end, thinning and styling is also done.

With a shaved temple

Shaving the temple is carried out mainly with an asymmetric version of the haircut from the side of short strands in the temporal zone. If you wish, you can shave the drawing. But then the haircut will require more frequent adjustments.

It is important to choose only highly qualified masters.

On curly hair

When cutting curly hair, it is required to take into account that after drying, the length of the strands can be shortened by 1.5 cm. The cutting technique is similar.

But in the end, it is required to make thinning with special care. It will allow you to give the desired shape to the hairstyle, which can be disturbed by hair curls.

Styling rules at home for every day and holidays

When choosing a bob-bob haircut with graduation, you must purchase the necessary hair styling products in advance:

• Hair dryer. It will allow you to give your hair the desired splendor;
• Curling iron, and curlers. They will help to give the desired curls to the hair;
• Iron. Used to straighten unruly curly strands;
• Brashing. Round comb that allows you to curl your hair slightly while blow-drying.

The most important element is the variety of styling products (gels, mousses or varnishes). It is important that they should not weigh down the hair, otherwise the look and shape of the haircut will be lost.

Haircut styling options:

• Apply the mousse evenly to moisturized hair and use a hair dryer and brush to add volume to the hair. Curl hair from the very ends;
• on clean hair, apply a styling agent and use special tongs or an iron to create “waves” on the hair. After that, do not comb the strands. If desired, you can slightly fix it with varnish;
• Apply gel or mousse to wet hair. Use your fingers to shape the hair to the desired shape. Dry gently with a hairdryer. After that, it is advisable not to comb the hair. Styling this way will give your hair the look of wet hair. For more shine, you can use cosmetic wax;
• apply gel or mousse to wet hair and twist curlers on the hair. Using a hair dryer (you can let your hair dry on its own) dry your hair. Unscrew the curlers gently while keeping the curls. Fix with varnish without combing. You can decorate your hair with a hairpin;
• apply gel on clean hair, highlight the bangs and lay it straight on its side. Curl the bulk of the hair using an iron (it allows you to make curls of different and irregular shapes). Finally, lightly comb and fluff the hair, giving it a slight carelessness. Fix with varnish.

Bob-caret stands out for its uniqueness (suitable for any age, any type of hair and facial contours) and complexity of execution.

Therefore, this haircut is not recommended at home. The additionally used graduation allows you to give the hair more volume (confirmed by numerous photos) and facilitate the styling process. The most recommended hair length for this haircut is for medium length hair.

Graduated haircut video

How to make a graduated bob square:

Author: Kotlyachkova Svetlana