How to cut your hair at home is fashionable, beautiful and unusual for yourself. A photo

Content

Well-groomed hair folded into a neat hairstyle is one of the main conditions for the beautiful appearance of a woman of any age. Straight or curly curls should always be washed and kept in shape.

At home, it is also possible to learn how to bring complete care, to cut your hair beautifully - fashionable and unusual. But before you cut your own hair, you should purchase the necessary tools and cosmetics, read the recommendations of stylists and hairdressers.

Basic rules for haircuts at home

To get a good haircut result, you must adhere to the following recommendations of hairdressers and stylists:

Choose a comfortable place: well lit, with a large mirror to maximize the view for the haircut.
Study information regarding a specific haircut: the more you study, the better the result will be.
Prepare sharp, preferably professional, steel scissors.
When choosing a haircut length, be sure to keep in mind that wet hair is always longer than dry hair.
There is no need to immediately cut off the planned length, since in case of an error there will be no way to correct it. It is recommended to trim the ends in stages.
Curly unruly hair can be cut both dry to better see the shape of the haircut, and damp.
Curly hair should be cut in a semicircle.

Organization of the workplace

You need to prepare the workplace as follows:

Place the instruments in the chosen place. It is necessary to clearly know the location of each tool in order to facilitate the haircut and shorten the duration of this process.
Scissors, comb and clamps must be at hand.
The mirror must be placed in such a way as to provide a good view. If there are several mirrors, they must be positioned so that you can see the head from all sides.
For convenience, you should prepare a chair in front of the mirror, since a haircut, especially done for the first time, can take a long time.
Among the tools for performing a haircut, there must be a spray bottle, because if you start cutting already wet hair, in the process it can dry out and it will be necessary to re-wet it for cutting.

Instrument preparation

At home, before cutting your hair, you need to prepare the tools for work:

a thin flat comb for separating strands;
sharp scissors. The most convenient for beginners will be scissors with a blade length of 6-10 cm (the shorter the length of the blades, the easier it is to cut);
thinning scissors. This tool is optional, but with certain skills in use, it is able to mask uneven cut ends and make the hairstyle lighter and more voluminous;
Before you cut your hair at home, you need to prepare all the tools.
good quality mirrors that should not distort the image so that you can see any flaws that need to be corrected. The ideal option would be to have a mirror (or dressing table) hanging on the wall plus 1-2 small mirrors nearby;
for hair of medium length and length below the shoulders, be sure to prepare clips or any hairpins that will help separate the strands for an even haircut;
the spray bottle can be replaced with another device with water, which will help wet the hair during the cutting process;

Before starting work, it is imperative to sterilize all the instruments.

How to trim your hair

At home, you first need to decide on the concept of a haircut (how the hair should be cut as a result): you only need to cut the ends, trim the bangs or remove the length of the hair.

Before starting work, it is imperative to sterilize all the instruments.

Tips

Split ends of the hair should be trimmed to improve hair health. Be sure to go through the procedure of trimming them in the salon or on your own at home once a month.

You can do it at home as follows:

Wet hair (slightly towel-dried after washing or wet with a spray bottle) must be combed thoroughly.
Select strands from the parietal part of the head, pin the rest of the hair with hairpins or clips.
Using a fine comb, select 1 strand from the selected ones, and remove the rest of the curls on the face.
Cut a little above the split ends, holding a strand between your index and middle fingers. If the hair is trimmed about once a month, then it is enough to cut 1-2 cm.
Next, you should move along the entire length of the hair from right to left or vice versa. The length of all other strands will be equal to the length of the first cut strand. Therefore, it is imperative to grab some of the already cut hair along with the next long strand.

After the end of the haircut, the hair needs to be dried, look at the result and, if errors are visible, trim the already dry strands.

Bangs

If everything is in order with the shape of the hairstyle and you only need to remove the length of the bangs, then you should:

Wash off all products from hair if they were applied earlier.
Be sure to dry your hair. If you cut damp hair, you can cut off excess as hair always lifts up after drying.
Separate the bangs, remove the rest of the hair with an elastic band or clips (hairpins).
Shorten the length of the bangs, starting from the right or left side. For the result to meet expectations, you need to separate strand by strand and cut them, holding the scissors at a 45-degree angle.
For curly hair, when cutting bangs, you should always leave about 2 cm extra, which will then twist into curls.

Haircut techniques

At home, in order to understand how to correctly and beautifully cut your hair, you should study the basic techniques (methods) that the masters master when performing haircuts.

The techniques are as follows:

Filing Is hair thinning. Strands become of different lengths due to the use of special scissors, while they seem more voluminous.
Shading - implementation of a smooth transition from long hair to short. It is allowed to perform both with a typewriter and with scissors. It is used on short hair.
Edging - a technique in which the hair lines become clearer and more even, have strict boundaries.
Reduction to zero - a technique close to shading, in which the hair is shortened from the center to the temples.
Haircut "on the fingers" - a technique when strands are highlighted one by one and cut above the fingers. The simplest haircut technique.
Graduation - a haircut in which the hair needs to be cut at a certain angle. There may be several options. The most common is the "ladder".
Smoky transition - a method based on the shading technique. It is performed very carefully, creating a smooth line from the back of the head to the ends of the hair.
"Platform" ("platform") - a technique in which a certain area is formed on the hair section in the region of the crown - a "brush".
Grinding - the final stage of the haircut, when unnecessary hairs are cut.
"Hot" haircut - haircut with hot tools, which is effective due to the fact that under the influence of high temperature (80-150 degrees) the ends of the hair are sealed and become stronger, there are much fewer split ends. But this method also has a drawback - the procedure for cutting with hot scissors takes a very long time (the duration depends on the length of the hair and is 1-4 hours).
Curly haircut - one of the original haircut options, extravagant and unusual, in which a certain pattern or pattern is shaved on the head. As the hair grows, the pattern needs to be updated.

How to cut your hair at home

How to cut your hair at home and choose the right technique depends on the desired result: trim the ends, create a new haircut, trim the bangs.

Split ends of the hair should be trimmed to improve hair health.

After a professional haircut

If the hairstyle was originally done by a professional, then it is possible to correct the shape after hair regrowth on your own.

It is enough to follow these recommendations:

Wash off previously applied products from hair. If your hair is already clean, you should moisten it with a spray bottle.
Comb your hair thoroughly.
Divide all hair into 3 zones: parietal, occipital and temporal. A haircut should start with the hair on the crown, then - on the temples, and end with the occipital zone.
Select one strand from the first zone, hold it between two fingers and cut to the desired length. When cutting, be sure to tighten the strand.
Next, you should process the following strands. You need to remember the number of cut centimeters of the first strand and then cut off the same amount. The second option - when cutting the next strands, you need to grab part of the previous one and be equal to it.
For a complete look, you should use thinning scissors and trim the curls along the entire length with them.

For bangs

The bangs need to be trimmed more often than the main part of the hair.

Therefore, if you want to save time and money, it is easy to trim it at home:

Wash bangs and dry a little or moisten clean bangs with a spray bottle.
Choose a wide strand (about 3 cm) from either edge of the bangs. Pull it on, holding it between your fingers.
Cut off the overgrown ends.
Select the next strand. Pull it along with the part already cut and trim further.
Process all the bangs.
In conclusion, the strands should be thinned. But keep in mind that this technique is not suitable for all types of hairstyles. For example, it is not recommended for thick straight bangs.

Cascade

This haircut has been relevant for a long time, suitable for women with any type of face and hair, and is performed using the graduation technique.

The instruction is as follows:

Comb through damp hair.
Divide hair into zones, secure with clips.
In the parietal part of the head, select one strand along which the entire haircut will be equal. This part must be pulled straight up and cut off the excess length.
Treat the hair at the back of the head. The strands must be separated by horizontal parting. Please note that each layer between the partings must be the same width (several centimeters). Pulling to the first (control) strand, you need to cut the desired length so that the upper part of the cut is shorter than the lower one. You need to move in the direction from bottom to top.
Then the parietal and temporal zones should be treated in the same way as the occipital. Each top layer should be slightly shorter than the bottom.
At the end of this haircut technique, experts recommend thinning, which gives additional volume to the hairstyle.

Under the square

How to easily and correctly cut hair under a square at home is described by the following instruction:

Prepare 4 rubber bands.
Comb clean and damp hair, paying special attention to the ends of the hair.
Part hair with a parting (straight or side).To make the parting even, you should use a second mirror or ask someone to help.
Tie 2 tails at the bottom. If you place the tails in the middle, you get an even haircut, if closer to the back of the head (behind the ears) - an elongated square in front, if closer to the face - an elongated back. For the elongated version, you also need to stretch the front strands a little so that they sag.
On one tail, you need to tie a second elastic band below the first - at a level that will be equal to the length of the haircut. If in doubt about the length you choose, tie your hair down. Do the same on the other tail.
Check the symmetry of the arrangement of the tails and tied elastic bands.
Cut your hair under the bottom elastic. For convenience, you need to cut off individual strands, retreating from the elastic by about 1 cm.
Then you need to trim the hair cut. Remove the rubber bands.
Then the hair should be trimmed. It is more convenient to do this, starting from the face and moving towards the back of the head. The hair must be disassembled into small strands, capturing part of the strand already trimmed earlier and aligning with it.
To trim the bottom strands, you need to separate the upper part of the hair and secure it with an elastic band or a clip (hairpin).
Comb through the bottom of the hair again thoroughly. You can check the symmetry of the haircut by connecting the extreme lower side strands at the crown.
Moving from the face to the back, you need to divide the hair into small strands and trim.
Loosen the fixed hair, comb and check the quality of the haircut. If necessary, cut off uncut strands that come out of the hairstyle.
Style your hair and then check the result again.
To hide small defects in the haircut, you should use thinning scissors. Also, the thinning effect can be achieved with ordinary straight scissors. You need to put them almost parallel to the hair and make small cuts along the length of the hair.

Bob

Haircut "Bob" in another way, experts call a graduated square. It is performed in several layers. This is how it differs from the classic square.

Making yourself a "Bob" hairstyle will not be difficult:

Divide well-washed and dried hair with a straight parting from the middle of the forehead to the neck into 2 parts.
Secure your hair with clips (hairpins).
It is necessary to start a haircut from the lowest strand in the back of the head, cutting off 1 cm from it.
It is necessary to cut strand by strand, moving up and not pulling the strands too much. Divide the curls only horizontally. Their width should be about 1 cm. In this way, a haircut is obtained using the graduation technique.
Having processed one side of the head, it is worth moving on to the other. Align the two sides.
The lower strands from the temple area should be aligned with the lowest strands at the back of the head.

From the tail

You can cut your hair in a cascade at home either in separate strands or from a regular tail.

Instructions:

Comb through damp hair.
Tighten a tight tail on the crown.
Ponytail hair comb forward over face and cut at eye level or below.
Profile with special scissors.

If the tail is made from the side, the cascade will turn out to be asymmetrical. And if you do not cut with scissors, but cut the length of the hair with a razor, the haircut will be voluminous.

Haircut instructions from the tail located at the back at the base of the head:

Divide wet hair in the center with a straight part, using a comb with fine teeth.
Collect a smooth and tight ponytail from the bottom of the hair as low as possible on the back of the head, strictly in the middle.
Using the second elastic band, collect another ponytail above the future hair cut line from the top of the hair.
Gently pull the tail up.
Cut off the hair below the second elastic. Trim in small pieces.
Remove the elastic and check the line for evenness. If necessary, reassemble the ponytail and trim the hair.
Thinning is recommended at the end of the haircut.

The next method is to cut with 4 tails, so you need to prepare 4 elastic bands. This method is suitable for those who wish to increase the volume of their hair.

You need to do the following:

Divide damp and combed hair into a straight part. If you have a bang, you need to separate it.
Then, from the crown of the head, you need to make 2 more parting down (in each direction) to the ear.
As a result, the hair will be divided into 4 parts, which need to be fixed in tight tails. Each tail should be located in the middle of its zone.
Each tail must be combed and, holding them alternately between the fingers, cut to the desired length. In the process of trimming, the tails should be kept strictly perpendicular to the floor, directed straight up.
After removing the elastic bands, the haircut will turn out to be multi-layered and voluminous.

Down your head

There is another easy way to make your own haircut - upside down.

You can cut your hair in a cascade at home either in separate strands or from a regular tail.

It is suitable for medium lengths and over and is carried out as follows:

Hair should be damp. You should lower your head as far as possible.
Brush hair.
Start cutting off the strands on either side and move to the opposite. After processing each strand, you need to brush it over it, make sure that there are no irregularities.

As a result, you should get a haircut with minimal graduation.

Professional advice

Before you start creating a haircut at home, the masters of their craft recommend that you familiarize yourself with some tips that will help simplify the task.

Namely:

Before buying scissors, you should pick them up. The scissors should fit comfortably in your hand and not pinch your fingers.
If this is the first time you are doing your own haircut, you should not try to cut it short. In case of failure, there will be no more opportunity to remedy the situation.
When cutting in the salon, be sure to pay attention to the work of the master. When self-haircutting, you should apply its techniques.
Keep in mind that thick, curly or coarse hair is much more difficult to cut yourself, so you need to think carefully before starting the haircut process. If a decision is made to cut, then as the strands dry, they must be moistened with a solution of water and conditioner.
If the goal of a haircut is to remove weak and split ends, remember to cut the hair at least 5 mm above the damaged part.
If you have not previously had experience with self-cutting, you should use a long clip, specially designed for this, to trim your hair. It allows you to get an almost perfectly straight cut.
If you want to get a softer cut of hair, the scissor blades should be almost parallel to the hair, not perpendicular. With this method of haircut, the ends will be fluffier.
You need to start the practice of independent haircuts with simple options when the hair is of the same length. For convenience, the length to be cut is measured with a ruler. Complex hairstyles should be mastered as you gain skills and gain confidence in your abilities.
At the first hairdressing work, you should not cut off a too thick strand at a time, as the cut will turn out to be uneven.
The result should always be checked after the hair is dry. Drying your hair is allowed naturally or with a hair dryer. If flaws are found, they should be carefully eliminated already on dry hair.

It is not difficult to make your own hair or cut your hair at home if you follow the technology and step-by-step instructions for styling a haircut, as recommended by stylists and hairdressers.

The main thing is not to be afraid to experiment, while observing safety precautions.

How to trim your hair ends yourself:

How to cut your hair at home:

How to cut your hair beautifully - step-by-step instructions with photos for long, short, medium curls